10" Big Blue Whole House Water Filter 5 Micron Pleated Sediment Cartridge with clear blue transparent housing

• COMPLETE:  1 Complete 10-inch big clear housing, 1"NPT inlet/outlet, with a plastic wrench, 4 x screws, and metal bracket

• POWERFUL: 1" MNTP Inlet / Outlet, 10”x 4.5” Filter Cartridges have minimum impact on water flow. With a large capacity housing, it can be used for high flow applications such as city/municipal or well water. Flow rate: 5-15 GPM (Depend on Feed Water Pressure)
  

• RELIABLE: Clear housing allows you to see when you need to change filters. Fits all standard-sized 4.5 x 10-inch industry whole house cartridges. All housings come with a pressure release button for high pressure making it easier to replace the filter.
  

• This system is not a Reverse Osmosis and will NOT reduce (TDS) Total Dissolved Solids from your water. Looking for a system to remove TDS, you can check Bluonics RO systems. The cartridges are individually wrapped for freshness. Please unwrap the cartridges before using them.

Description

Maximum Pressure: 80 PSI, SUGGESTED WORK PRESSURE: UNDER 50 PSI, Temperature:40-110°F/5-45°C, Shelf life: 5 Years. Standard sized housing for 4.5" x 10" filters

Filters Included:  4.5 x 10"  Pleated Sediment filter (5 Microns) to Remove sand, dirt, sediment. Expected lifetime: 6 months. (depends on water quality)

Protect filter housing from freezing.

The maximum operating pressure rating of 80 psi, if you suspect that your water pressure will at any time exceed 60 psi, a pressure regulator must be installed before the filter housing and be set at 50 psi or less.

The rubber o-ring provides a good grip between the cap and the sump. Please make sure that the o-ring be properly seated in the groove to avoid any leaks.

Great after-sales customer support: 30-day money-back guarantee. Extended manufacturer warranty. Lifetime tech support from Bluonics in Sacramento, California, USA (888) 207-8939